ALL NOVEL Chapter 189 Fang Bai went crazy
The day after the industrial exhibition, Fang Bai returned to the company and convened a production meeting with the production manager, workshop supervisors and team leaders.
Fang Bai sat in the main seat with a smile on his face and said: "This seven-day industrial exhibition was a complete success for our company, with orders for 10 pump trucks and 20 ground pumps abroad; 120 ground pumps and 16 pump trucks domestically.
26 pump trucks and 140 floor pumps are required to be delivered within three months. The company's production tasks will be very heavy.
As the market opens this time, the order volume will be much higher than usual. Everyone must be mentally prepared until the staff is expanded. "
Fang Bai paused for a moment, and the participants applauded enthusiastically. It's good to be busy, they all get paid for working overtime.
Fang Bai's face changed and he said solemnly: "There are many orders, but we must strictly control the quality. If the quality is not good enough, it will damage the company's reputation and kill the company."
The meeting was not long. Fang Bai only did ideological work for the production staff. After about ten minutes, the meeting ended.
The contract value is 110 million yuan and 10 million US dollars, the cost is not much, and the gross profit is over 100 million yuan.
The company received tens of millions of yuan in deposits and was not short of money at all, purchasing materials and production equipment in large quantities.
The production of pump trucks must be arranged in the new factory, and the old factory space is not enough for use.
After the meeting, Fang Bai went to patrol the workshop.
While inspecting a welded structure of the ground pump, he discovered a very serious problem that caused the construction workers to stop and the workshop supervisor was also on site.
"To weld this structure, the welding wire used should be ER55-G, not ER50-6. Did you fail to change the welding wire in time?" Fang Bai pointed out the problem seriously. He just used a gold finger to detect it and found that the weld seam turned red. It said it was unqualified. I looked at the welding wire instructions on the wire feeder and found that the welding wire used was ER50-6.
"Boss, it seems that this welding wire can also be used to weld Q345B, right? The strength of the welds is about the same." The worker responded slightly nervously.
"Anyone who can use it like you can call the welding engineer to come over." Fang Bai replied seriously, "The process has already stated what welding material to use, so you should use the welding material, don't change it without authorization.
If you think there is a problem, you should submit your opinion to the supervisor and welding engineer. After obtaining the consent of the welding engineer, you can modify the process before doing it. "
Under normal circumstances, Fang Bai would not get angry with workers.
But some workers don't even listen to their supervisors. They feel that their supervisors don't understand welding. They feel that they have been welding for more than ten years and are very professional. They don't follow the process documents.
Anyway, he is just an old fritter, and is not afraid of anyone except the boss.
Therefore, sometimes it is necessary for the top management to crack down on stubborn workers.
Two minutes later, the welding engineer arrived at the scene.
Fang Bai severely criticized: "Should we use ER55-G welding consumables to weld this structure? Why don't we follow the process?"
The welding engineer saw his boss getting angry: "Yes."
Fang Bai frowned and explained: "Then why are you using incorrect welding materials? Even though the strength is not much different, it is a big problem. Have you considered the usage conditions of our company's products?
The vibration of the ground pump is very large during operation, especially the important structures, which are prone to fatigue stress. We currently have no good way to eliminate welding stress, so we must start with welding materials.
Although it is no problem to use ER50-6 welding on Q345B, it cannot be used with our company's products, which directly affects the life of the weld. I estimate that it will not take long for the weld to crack. It is not a strength problem, but due to fatigue stress. question.
The quality of the current domestic welding wire cannot meet the standard requirements at all. If it is imported ER50-6, it may be fine.
For machinery with high frequency vibration, fatigue damage is one of the main reasons for the failure of mechanical parts. You should pay attention to this.
We have a batch of products to be exported, and the use environment is still a low-temperature environment. They all require the use of low-temperature and high-toughness welding materials. You should pay more attention to this. "
"Boss, this is my fault." After hearing this, the worker probably understood that the boss was not angry for no reason, but that he knew welding technology very well. He thought that after working as a welder for more than ten years, he knew how to weld. In fact, some The details are still unclear.
"Boss, I am also responsible. Supervision is not in place."
"I have a responsibility too."
The welding engineer and workshop supervisor quickly admitted their mistake. After all, the boss was right.
"If the wrong welding material is used, just use carbon blast to remove the root, polish off the oxide layer and then repair the welding. If it cannot be repaired, then just scrap it." Fang Bai saw that the three people admitted their mistakes and had a good attitude, but the ones who should be held responsible should still be held accountable. , telling the solution, “After this batch of ER50-6 is used up, it will no longer be purchased and used. All Q235B and Q345B welds will use low-temperature and high-toughness welding materials to avoid confusion.
The engineer will modify the process and supervise the use of welding materials on site. "
The cost of ER55-G welding consumables is 1.5 times that of ER50-6, about 12 yuan per kilogram. Compared with the cost of the entire equipment, the cost of welding consumables is not much.
Fang Bai is mainly worried about the quality of welding materials in this era. The strength of ER50-6 is no problem, but the plasticity of the weld is poor, and the elongation cannot reach the minimum requirement of 21%. If the current and voltage used are higher, Welds are more brittle and prone to cracking.
A welding machine can only hold one plate of welding materials. Some welders are too lazy to change the welding materials, and it takes a few minutes to change the welding materials. It feels like the welding results are the same, but you can't tell unless someone supervises the use of the welding materials.
In order to avoid welders using errors, we might as well unify the requirements.
The workers felt a little worried when they heard the boss said that all the work must be repaired.
After repairing one, you can weld two.
But I was very helpless. Who could blame me? I only blamed myself for not clearing it up, and it would take a week to rework it.
If you make a mistake this time, your performance pay will definitely be deducted, and the workshop supervisor will also be fined.
"Okay, I'll modify the welding process right away." The welding engineer responded immediately.
Fang Bai nodded and left the welding station with his hands behind his back.
After he left, the workshop supervisor glared at the welder and said, "It's just a fool's errand. It's all in vain. As a result, my bonus was also deducted."
"I thought it could be used. Many factories use it this way." The worker excused himself for being too lazy to change the welding wire.
The workshop supervisor sarcastically said: "You think you think that the boss doesn't think so. Even though the process documents are here, you have to do it according to your own ideas. You are so awesome."
Now, the worker did not dare to refute, and he could only blame him for being self-righteous.
"Most of the company's processes have been personally reviewed by the boss. The welding current and voltage must be within a certain range. The current and voltage cannot be adjusted too high for the sake of speed. Don't think that the boss is young and doesn't understand these things. People can see the problem at a glance. The boss is very capable." The welding engineer reminded the workshop supervisor and the welder that in fact he was also responsible for this matter and did not supervise it properly.
This time they were criticized, and the three of them suffered. Although they didn't get any money, they still felt uncomfortable after being criticized.
"If you make a mistake in welding, repair it all. Don't take chances." The welding engineer reminded that when the two welding materials are welded, it is impossible to tell the difference just from the surface of the weld.
"Hey, okay." The welder sighed and honestly went to pick out the wrong workpiece. The workshop supervisor asked next to him.
Fang Bai's on-site patrols also focus on welding. After all, their company's products have the most welding processes and are the most likely to cause problems.
In addition, external components are prone to problems, and he should also check important external components.
For quality inspectors, it is more troublesome to detect workpieces, but Fangbai is much more convenient with golden finger detection.
Check in seconds!
If there is any problem, it will be checked out at once, so the quality of the company's products can be guaranteed.
However, as the company continues to expand, he cannot always do it himself and can only conduct final inspections after the entire product is assembled.
The group's most profitable project at present is the machinery company, so he attaches great importance to it.
Next is the real estate company. The fifth phase of the Wencheng Cuicanoujiangting real estate has been sold out, with a subscription rate of 99.5%.
After the cap is capped, the company will be able to earn at least 61 million yuan in pre-tax profits from this project. After the shops and parking spaces are sold out, the pre-tax profits will be at least 76.3 million yuan.
Xinghai Mall's monthly net profit is about three million yuan, which is quite a lot.
As prices continue to rise and people's incomes continue to increase, monthly profits will continue to rise.
But compared to the machinery company, the profits earned by the two companies are indeed incomparable.
The machinery company has accumulated a lot of money, and once the market opens, it will make a steady stream of money.
Of course, after the real estate company and Xinghai Shopping Mall expand in scale, their earning power is not bad.
Real estate companies now have experience in operating real estate projects. The next real estate project will be a large one, with hundreds of acres of land and thousands of houses developed at a time.
At the same time, the company continues to expand in scale and plans to develop two properties at the same time after the end of the year and develop them in multiple cities in the future.
There were no channels in the past, but now that Xinghai Group has become famous, it will be welcomed by the local government for investment.
Fangbai will adopt the future Wanda commercial real estate development model, that is, residential buildings, office buildings, entertainment centers, and hotels will be developed around Xinghai Plaza.
In terms of the speed of making money, real estate is still very fast, and then the money is transferred to technological development.
Although real estate has been criticized, if there are no unfinished buildings, more charity, and high-tech endorsement, it will not be a problem at all.
People will think that the money earned by Xinghai Real Estate Company is invested in high-tech companies, and everyone will be more tolerant.
Of course, no matter what business you are doing, it is difficult to avoid being hacked.
There will always be people who are jealous, no matter how well you do, or some countries do not want to see the Xinghai Group develop, and they will definitely want to create a black Xinghai Group.
Some people are blind, but the leaders above are not blind.
This is why Fang Bai agreed to make himself more popular and make himself more socially influential.
Today, he represents not only himself, but also his family, all employees and their families of the entire group.
News reports about him have been constantly fermenting during this period. More and more people across the country know about Fang Bai, a young rich man, and his miraculous entrepreneurial deeds.
Of course, it has not yet reached the level of being known to all the people. After all, information dissemination in this era is relatively backward. It is estimated that there are 40 to 50 million people, most of whom are people in Shanghai and Wencheng.
But in Jiaotong University, Fang Bai's deeds spread very quickly. Everyone usually discusses his affairs and sees what big moves he has made recently.
When Weng Lie, the president of Jiaotong University, learned about Fang Bai's recent news, he was very shocked: God is really feeding him!
An exhibition can generate tens of millions of dollars in foreign exchange!
Tsk tsk, amazing.
Fang Bai's classmates all know about Fang Bai's latest news, and they usually pay attention to it. Whenever there is new news, everyone will tell each other and discuss it.
"The squad leader is Niu Bi, and he became famous all of a sudden, from the campus to Shanghai, and then to many provinces."
"He has also been featured in People's Daily. I guess all the leaders of government departments across the country know about him. It will be much easier to expand markets in other provinces in the future."
"We negotiated with various schools and colleges to open supermarkets. If we hadn't been under the banner of the monitor, it would have been so easy to negotiate. So, even if we don't care about Hualian Supermarket, he has paved the way for us."
"Yes. How else would a bank be willing to give us a loan so easily? Is one million yuan enough? Two million yuan is also fine. Recently, the bank president personally came to ask if we want to increase the loan."
"Of course we do. As long as we can keep up with our expansion speed, the more the merrier. But the squad leader said that if we don't expand quickly, we will be flooded with capital, and we will be under greater competition pressure."
"Hey, when I entered the school, I was still thinking about becoming a student union cadre in the school. The squad leader had already dealt with the county leaders before he entered the school. Now it is reported in the newspaper that the leader of Seizheng F University who dealt with him." Yang Tan was filled with emotion. When he first entered school, his goal was to be the class president, but as a result, he couldn't even make it to the class committee.
As for the squad leader, whom Fang Bai didn't like, the counselor gave it to him.
Now the monitor can speak more effectively than the president of the student union, and the principal is polite to him, let alone the president of the student union.
Last semester, he finally joined the school student union as an ordinary member. The department boss asked him: "You are from Class 3 of Mechanical Engineering, Fang Bai's classmate?"
"It's a roommate."
"That's very welcome!"
I don’t have any special skills, I just rely on connections.
However, Yang Tan doesn't dare to use Fang Bai's flag to do things now. He understands the little thoughts of some students.
Now I feel like it doesn’t matter if I am a student union cadre or not, money is good.
Tomorrow is the lottery for subscription certificates, and their roommates are looking forward to it very much.
That night, they took a bath, cleaned themselves up, and waited for the third lottery. (End of chapter)