Born Tech Mad

After lunch, the four old experts kept their promises and no longer entangled with Rose. They left reluctantly. When they left, they insisted on leaving their phone number to Rose. If Rose had any difficulties, he could call at any time. they.

Although the four old men are a little conservative, their conscience is not bad. Rose does not want to refuse the kindness of the old people and write down their numbers.

After leaving by four old experts, the villa finally restored its tranquility.

Rose didn’t want anything anymore. When he went back to his room and fell asleep, he fell asleep. These days, he was tired enough to develop the ‘arc reactor’. If he has time, he must make up his sleep.

With this consciousness, he slept darkly, and woke up the next day, and Rose was shaken, and the villa was quiet.

Rose originally thought that after those guys from the National Security Bureau reported to the country that they had mastered the technology of ‘cold fusion’, there might be a high-level call. But now everything is calm.

“Hehe, maybe the scientists of the Chinese Academy of Sciences are studying my ‘arc reactor’ through video! I heard that our country’s cottage capability is the best in the world, and those guys would not want to copy my ‘arc reactor’, and then do n’t Spend it, get that technology. “

“Haha … so naive. Let them study slowly. No one except me can master this technology. Even if they disassemble my reactor into parts and observe it with a microscope, they still cannot grasp this. technology.”

“Sleep really good Nima! Don’t waste time, do my electromagnetic device!”

休息 Resting for another day, I ca n’t get any eggs, it is better to finish work early and rest. Rose, who has an absolute concept of time, simply re-entered the research of electromagnetic devices.

The equipment of electromagnetic devices purchased by Tan Li has been partially completed, and Ross decided to start this thing from now on.

I wore work clothes again, and Rose was busy again.

This electromagnetic device is divided into two inside and outside.

The whole electromagnetic device has two sets of equipment, except for the inside, there are two electromagnetic walls up to three meters long and three meters high. The outer layer also has a huge ring device with a diameter of twelve meters.

This ring device adopts the technology of Tokamak device. The Soviet Union mastered the use of this technology in 1954. Humans can use the technology of Tokamak device to restrain electromagnetic and plasma.

技术 This huge superconducting tokamak device technology is composed of dozens of huge toroidal electromagnetic coils, once they are energized. The resulting magnetic force is projected onto the electromagnetic wall.

The electromagnetic wall absorbs these magnetic forces and accelerates them, which can instantly increase the magnetic force by 300 times.

The inner layer is two huge electromagnetic walls. According to the design of Ross, the height of the electromagnetic wall is three meters and the length is five meters. All of them are made of electromagnetic modules, and there are about hundreds of electromagnetic modules. Each electromagnetic module weighs hundreds of kilograms.

The magnitude of the electromagnetic magnetic force has a great relationship with the number of coil turns and the amount of current. The more turns of the coil, the greater the magnetic force generated, and the fewer the number of turns, the smaller the generated magnetic force.

In the Marvel world, the coil material used in magnetic devices is made of nano-metals. This metal is more than 100 times stronger than ordinary copper wires. A magnetic rod the size of a finger-tip made of nano-sized metal wires can easily lift a train.

He did not have such a nanowire as a coil, he could only use quantity to win.

There are hundreds of electromagnetic modules, and each module is wound with ordinary lacquered copper wire, which is densely wrapped around tens of thousands. Once energized, the magnetic force generated by each electromagnet is equivalent to ten times the magnetism of the magnetic crane.

With the giant superconducting Tokamak device on the outer ring, after the magnetic wall is formed with a doubled magnetic force, an electromagnetic module, the generated magnetic force reaches a terrifying stage. In a vacuum environment, a car 100 meters away can be automatically sucked in.

When hundreds of electromagnetic modules are activated at the same time, the magnetic force generated by the magnetic wall is more terrifying.

But this is not enough. Ross’s plan is to completely concentrate the magnetic force of the entire electromagnetic wall, so that the resulting magnetic force will be extremely powerful.

To concentrate the magnetic force generated by the magnetic wall, Ross needs a magnetic concentrator. This involves the level of electromagnetic reflection technology, which has been applied in the industry. Many metals have the ability to reflect electromagnetic waves. For example, a metal mesh on an induction cooker can reflect electromagnetic waves. In addition, almost any metal can reflect electromagnetic waves.

Rose uses a unique technology to mix and melt dozens of different metal materials in proportion, and then mix with 12 precious rare earths to smelt a super strong magnetic reflection material. These materials are then used to make a mirror surface.

When the magnetic wall projects the magnetic force on this mirror surface, the magnetic reflection device will concentrate the magnetic reflection to a point, or a surface, and form a magnetic concentration.

In addition to magnetic reflection and concentration, the environment is also important. The resistance of the air will affect the electromagnetic acceleration, so the most ideal state is to concentrate this electromagnetic energy in a completely vacuum environment.

The design of ross is to use a huge reinforced glass cover to drain the air inside, after it is in a vacuum state. The magnetic force is then concentrated into this vacuum hood.

除了 In addition to technical reasons, this work also has important technical parameters. When hundreds of magnetic devices generate magnetic force at the same time, how to make the two magnetic forces repel each other is also the most important point.

Hundreds of electromagnetic modules have been purchased in place. These magnetic modules have been wound with coils in accordance with Rose’s requirements. Save a lot of time for Ross.

Use an aerial crane to lift an electromagnetic module and place it in the research room where it was drawn.

Rose began to install wiring for this electromagnetic module. Before the power was turned off, these modules could not generate any magnetic force.

The whole electromagnetic device, the core technology, is only a few steps.

The first step is to manufacture the giant superconducting tokamak device in the outer ring. The second step is to manufacture the magnetic wall. The third step is to reflect the magnetic force. The fourth step is to concentrate the magnetic force.

Ross intends to develop the center’s electromagnetic wall-related device first, starting with the simplest work, first assembling the electromagnetic wall. This least technical work requires a serious attitude.

组装 When assembling the magnetic wall, it must be seamless, so that all modules are combined to form a smooth mirror surface like a mirror, so that the magnetic force is released at the same time every second. If the position is slightly worse than 0.01 mm, the magnetic release cannot be synchronized. Magnetic force cannot be concentrated. A small size difference can affect the full play of magnetic force.

Rose devoted himself to work. After each electromagnetic module was assembled, he took the instrument and measured whether the distance reached the standard. Ross uses a strict, serious, and responsible attitude to complete every job, even this kind of work that does not require technical content is no exception.

After a second, the simplest job was completed after Rose unknowingly worked for three days.

Looking at two smooth electromagnetic walls up to three meters and five meters in the research room, Rose was very satisfied.

If you do n’t use a magnifying glass to see ~ www.mtlnovel.com ~ these modules are almost a whole. The two electromagnetic walls are controlled by hydraulic devices. Under the control of the computer, the hydraulic devices like jacks can make the electromagnetic walls flexible, can move back and forth, and can be tilted. This is done in order to cooperate with the release of magnetic force and form different sizes. Electromagnetic field.

“The easiest thing is done. Let’s start magnetic reflection, concentration, repulsion and balance. The outermost ring superconducting Tokamak magnetic acceleration device, let’s do it last!”

Rose wiped a sweat, and began to get busy again, working for the next magnetic reflector.

The next day, Ross was busy, and Tan Lin suddenly called. He had mortgaged Lihua Group and loaned 60 million yuan to Ross. The interest rate reached 0.7%, and monthly interest alone would give the bank four or five million.

“It’s a two-pronged approach, let sister Li also help me purchase genetic equipment at the same time.”

Rose left the research room happily, suspended his work, and went to the bank. After signing the loan contract, Rose returned to the experiment and gave Tan Li another procurement task.

After handing over thousands of purchase orders to Tan Li, Ross looked at frowning Tan Li, smiled, and went back to the research room to continue her work.

After ten days or so unknowingly, Rose had just completed the manufacture of the electromagnetic reflection device, and was preparing to re-enter the manufacture of the magnetic concentration device.

A military transport plane suddenly landed in front of the Tan House.

[This chapter is a bit confusing. The next time I write and develop various devices, I will keep it simple. Take it in one stroke. .mtlnovel.com ~ Please read for mobile users.